TOYOTEC’s micro cylindrical lens is manufactured using precision glass spherical machining, achieving an extremely small radius of curvature of R1.65.
With our proprietary processing technology, we realize high surface accuracy at the 0.3 µm level (less than one Newton ring / PV λ/2).
This technology delivers high optical performance while maintaining cost efficiency and suitability for mass production.

Challenges Before Implementation

The customer was seeking a micro cylindrical lens for LiDAR (laser scan type) emitter systems.
In particular, for FAC / SAC lenses used in LiDAR projection optics, they faced challenges related to performance limitations, cost constraints, and concerns over supply interruptions caused by geopolitical risks.

Why TOYOTEC?

Long-standing customers often say, “When it comes to cylindrical lenses, TOYOTEC is the first choice.
TOYOTEC is especially valued for its ability to provide practical, production-ready design proposals from the early development stage, based on the following strengths:
-Responsible support that goes beyond prototyping and extends through mass production
-Cost-effective solutions even for small production volumes enabled by proprietary processing technologies
-A strong sense of security backed by long-term mass production and stable supply performance

As a result, TOYOTEC is chosen as a partner that turns “not sure if it can be made” into “ready for mass production.

Prospects for the Future Based on the Effects and Changes Resulting from the Introduction of the System

TOYOTEC has supplied approximately 3 million cylindrical lenses per year for over 20 years, primarily to the OA market.
This long-term, high-volume supply record is clear evidence of our reliable glass cylindrical lens processing technology and robust mass production capability.

As a result, we have achieved the following:
– High reproducibility in small R machining
– Stable quality on mass production lines
– A highly reliable production system designed for long-term supply

Are You Facing Any of These Challenges?

If any of the following issues sound familiar, TOYOTEC is ready to support you:

-You want to pursue new technologies, but lack a supplier who will stay committed through the entire development process
-Minimum order quantities are too large, or suppliers cannot meet your required volume and cost targets
-Concerns about supply disruptions and geopolitical risks due to dependence on overseas or Asian manufacturing
-Uncertainty about long-term component supply caused by succession issues or aging management at small suppliers

👉 Contact TOYOTEC to discuss your requirements.

The post Micro Cylindrical Lens for LiDAR Emitter systems (Laser Scan Type) appeared first on Toyotec Solutions.

“We wanted to create a truly unique lens processing technology—something only TOYOTEC could deliver to the world.”

That vision sparked the development of our new micro cylindrical lens solution.

TOYOTEC has long specialized in glass cylindrical lenses manufactured using a proprietary methods. This method allows for low-cost production of long cylindrical lenses and has been trusted by clients both in Japan and overseas for decades. Now, the original inventor of that technology has teamed up with engineers in both Japan and China to adapt and refine the process for high-precision micro cylindrical lenses, taking it all the way to mass production.

We had received many customer inquiries over the years regarding micro lenses. However, the only available method for us was glass molding, which came with initial cost challenges.We always believed there must be a better alternative—something more flexible and cost-effective—and that belief is what led us to this innovation.

What Is Micro Cylindrical Lens for High-Precision Beam Shaping?

TOYOTEC is developing high-precision micro cylindrical lenses with small curvature radii (R), optimized specifically for laser applications.
This new technology is based on our proprietary manufacturing methods that does not require glass molding.
It achieves submicron-level surface accuracy, making it possible to fabricate deep-R geometries that are difficult to produce using conventional polishing techniques.

These lenses are ideal for:
・Beam shaping in semiconductor laser and LiDAR applications
・Enhancing fiber coupling efficiency and sensor ranging accuracy
・Simplifying optical design while ensuring compatibility with high-volume manufacturing

In addition, these lenses can serve as high-precision preform materials for molded aspherical glass lenses, where precise initial surface accuracy contributes to better molding quality and improved cycle stability.

Key Advantages:
✅ No need for glass molding → Reduces tooling and initial investment costs
✅ Improved beam uniformity → Increases production yield
✅ Greater design flexibility → Enables compact optical module integration
✅ Useful as glass molding preforms → Ensures high form fidelity and repeatable performance

Sample are available now.
If you’re exploring high-performance and cost-efficient solutions for laser beam control or glass preform supply, please don’t hesitate to contact us.

👉 Contact us here

The post Micro Cylindrical Lens Technology with Small R(Curvature Radii) appeared first on Toyotec Solutions.

Why TOYOTEC?
At Toyotec, we can provide a comprehensive in-house service, from fabricating mold tooling to form the mirror surface of the plastic lens (the process of forming the mirror shape), we can also provide a reflective coating (the process of applying a coating layer that enhances the reflective performance) to the molded plastic lens.

When considering to switch from metal or glass lens to plastic lens, while there are expectations of weight reduction and cost reduction, there are also technical issues such as adhesion strength, parts cosmetic quality and processing difficulty.
Another issue is that in the manufacture of plastic mirrors, the injection molding and coating processes are sometimes carried out by different companies.
In this case,

● It is unclear which process is the cause when a part/product defect occurs
● There is a risk of misalignment or inconsistency between processes, which can lead to a deterioration in parts cosmetic yield
and other problems are likely to occur.

In response to these issues, the customer adopted a proposal from Toyotec’s integrated system.
This enabled the realization of plastic mirrors by making use of the knowledge of molding and coating technologies that Toyotec has cultivated over many years.

Prospects for the Future Based on the Effects and Changes Resulting from the Introduction of the System
Plastic has a greater degree of freedom in terms of component shape than glass lens, and by changing from glass to plastic mirrors, we have been able to reduce the number of components.
However, when molding and coating are carried out by different suppliers, it is common for problems to occur, such as unstable quality and poor yield.
Toyotec solves these issues through integrated production. We prevent problems that are likely to occur in parts cosmetic and environmental testing by carrying out optimal manufacturing in-house.
Furthermore, we have also succeeded in meeting demands for precision (surface precision, angle) that were previously difficult to achieve, and we have received high praise from our customers for this.

Toyotec Solutions
We have a system in place that allows us to provide one-stop molding and coating services for plastic mirrors.
This integrated approach has achieved the following results

●Providing lightweight, cost-effective plastic mirrors
●Solving issues with parts cosmetic yield

Toyotec will continue to work closely with our customers to propose the most suitable solutions. We will continue to meet our customers’ expectations through the manufacture of high-quality plastic mirrors.

The post Plastic Laser Reflective Mirror appeared first on Toyotec Solutions.

Why TOYOTEC?
This business started with an introduction between local companies. TOYOTEC has been striving for mutual prosperity and growth with the local community. With more than 80 years of experience in lens design and production, TOYOTEC is highly trusted by local companies. TOYOTEC also has direct dealings with Tier 1 suppliers of Japanese automakers, and our high productivity and stable product supply have been highly appreciated.

Prospects for the Future Based on the Effects and Changes Resulting from the Introduction of the System
By sourcing from 2 vendors, the customer was able to reduce their internal manpower and re-allocate resources to new development. In addition, the customer was able to prepare for the potential risk of future EOL(End of Life) and supplier succession issues by taking advantage of our long-standing and reliable service at an early stage.

The post Glass Lens for Ophthalmic Devices appeared first on Toyotec Solutions.

Why TOYOTEC?
In addition to the custom design and manufacturing of the lens unit, TOYOTEC analyzed and verified the unexplained behavior of the light. By analyzing the phenomena and providing optical simulations, we were able to achieve optimal product development.

Prospects for the Future Based on the Effects and Changes Resulting from the Introduction of the System
TOYOTEC worked with the customer to develop the optimum solution for downsizing the machine and improving the efficiency of the optical system, and realized the commercialization of products with the required specifications. TOYOTEC has been supporting the production realization of optical designs for the customer for 20 years.

The post Glass Lens Unit for Scientific Analyzer appeared first on Toyotec Solutions.

Originally, the customer was using metal surgical instruments, which were cleaned and then reused. However, in order to improve surgical efficiency, they wanted to change from metal to plastic and make them disposable. When they asked another supplier to help them reduce costs, they found it difficult because of air bubbles in the product, so they searched the Internet for another supplier and contacted TOYOTEC.

The molded product is about 100mm in diameter and is a positioning product used in surgery, so removing impurities such as air bubbles was a challenging task. However, since we have experience in producing molded plastic lenses and lens module parts, we were able to propose a high-precision molded product by utilizing our know-how. In addition, since we handle the entire process from the manufacturing of ultra-precision molds to manufacturing, we are able to manufacture high-precision molds that meet the customer’s specifications at a low cost.。

In this way, TOYOTEC is able to provide not only optical products but also plastic molded products and their high-precision molds, which enables us to make design proposals and mass production including cost reduction. If you are having trouble reducing the cost of plastic molded products, please contact TOYOTEC.

The post Plastic Surgical Instruments appeared first on Toyotec Solutions.